Uniden Pro 620

Excellent indeed Caine. We have them here, both branded as Uniden and also Stabo, still fetching more than you paid used here infact quite a lot more

Hope to hear it on the air soon

Simon

Hello Simon. Should be able to hear you in a few weeks. Mid band is pretty dead here except for some truckers on AM or us locals, but that will all change as the e season kicks off. I've tried finding some info on the radio but can't really find anything or any mods for that matter.

Caine

Indeed there are not many mods, sole ones that i know are the piggy back for the 80channels. Power, Audio and the like there are none that can tell you sadly

No probs Simon. I didn't think there was much you could do with them. Not to worry i'll keep it standard. Thanks for info

Hi, i am new to this forum, joined cos of the uniden pro 620,
i have "piggy backed" a tc9119p from an old audioline, the vdd (+ve) pin is pin 3 on the fitted pll and pin one on the tc9119p an pin 2 on the 9119 has to go to pin 1 on the fitted pll, however, i got the radio to receive fine on al uk 40 channels but no luck on tx, i think the tc9119p is "looking for" 27mhz on the f in pin, not 13mhz as the fitted pll, am not full sure on this tho!
i got it to tx at some random frequency,, 29 mhz or so, but no lock, i tapped off 27mhz from the tx stage and fed to the f in pin and no joy,now it doesnt work on uk at all!
worth a try i guess!
any info apreciated!
thanx
Dan